We Think These Are The Best Les Paul Copies Out There!

Agile Al-3000

The Al-2000 and Al-2500 are great guitars period. Of course that is my opinion. Being the lover of a good deal that I am, I would say that an argument could be made that the Al-2000 and Al-2500 are the best guitars ever made when you consider how little they cost. Alright, I know that may be a bit of a stretch but hopefully you get what I mean. These are darn good guitars and darn good Les Paul copies!

If you are looking to really step it up a notch and get a guitar that would be on par, or even above par, of a high end Epiphone Les Paul, maybe like Epiphone’s ultra LP, than take a serious look at the Al-3000 or higher.

See Agile Al-3000 at Rondomusic

These are premium guitars! I would venture to say that you would probably have to pay two to three times more for a guitar of this quality that is an Epiphone or Gibson. So if you can live with a Les Paul copy guitar that doesn’t have the Epiphone or Gibson name on it than you will be extremely happy with an Al-3000. 

The Al-3000 is made up of two piece center jointed solid mahogany. The top is 1/16” AA grade Maple whereas the Al-2500 only uses A grade Maple for the tops. The body of the guitar is finished with a triple white binding with a single white binding on the neck and a the triple white binding continuing on the headstock. 

Instead of the ceramic covered pickups used in the Al-2000 and 2500, Alnico V covered humbucker pickups are used for improved sound. The wiring of the Al-3000 is also improved. Like the lower Al’s the guitar comes with two tone and two volume knobs but it also has high voltage pots, brass shafts and 4 conductor wire for even better sound. 

Grover 18 to 1 ratio tuners are standard so the guitar stays in tune. Instead of a 2 piece Canadian Maple the neck is made of one piece Mahogany. The fingerboard is upgraded from Indian Rosewood to Ebony and the neck inlays are made of Abalone rather than the Mother of Pearl or Pearloid used on the lower models. 

The frets on the Al-3000 are the same in size as the lower Al’s (2.7mm) but as an added feature they have been hand filed at the factory. The nut has also been upgraded from a graphite nut to a bone nut. 

As with the other Al’s the trus rod is dual action. The bridge and tail are die cast nickel or gold and the strings are GHS .010 - .046 gauge strings. The Al-3000 is a solid piece of equipment. I am not in a band but I would definitely think this could be used as a gig guitar.  

The Al-3000 is also offered with different neck tapers so if you prefer a slimmer neck or a wider neck than standard you can get that. 

I think my next guitar will be an Al-3000. I almost feel like I should go practice so my playing will be worthy of such a sweet guitar! In my opinion, this is a premium Les Paul copy electric guitar. 

Check out the Agile Al-3200 here.

Check out Les Paul copies at Rondomusic